 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AZ940 10 AMP MINIATURE POWER RELAY FEATURES * * * * * 10 Amp switching capability 4 kV dielectric strength Epoxy sealed version available UL, CUR file E44211 VDE file 134326 CONTACTS Arrangement Ratings SPST (1 Form A) SPDT (1 Form C) Resistive load: Max. switched power: 150 W or 1250 VA (N.O.) 90 W or 750 VA (N.C.) Max. switched current: 10 A (N.O.), 3 A (N.C.) Max. switched voltage: 150 VDC* or 400 VAC * Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (max.) Release Time (max.) Minimum operations 1 x 107 1 x 105 at 10 A 250 VAC Res. 8 ms at nominal coil voltage 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 1000 Vrms contact to contact (at sea level for 1 min.) 4000 Vrms contact to coil Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Operating 10 g for 11 ms 1/2 sine pulse (no contact opening >100 usec) 100 g for 11 ms 1/2 sine pulse P.B.T. polyester Tinned copper alloy, P.C. 270C (518F) 5 seconds 80C (176F) 30 seconds 7 grams 100 per styropor tray / 1000 per carton box 1 x 109 ohms minimum at 500 VDC Greater than 5% of nominal coil voltage At nominal coil voltage -40C (-40F) to 70C (158F) standard -40C (-40F) to 85C (185F) sensitive -40C (-40F) to 105C (221F) 0.062" (1.5 mm) DA at 10-55 Hz Rated Load UL, CUR (N.O.) 10 A at 125 VAC general use, 100K cycles [1] [2] 10 A at 277 VAC cos phi 0.4, 10K cycles [1] [2] 5 A at 250 VAC general use, 100K cycles [1] [2] 5 A at 30 VDC [1] [2] 1/ HP at 125 VAC, 100K cycles [1] [2] 10 1/ 6 HP at 250 VAC, 100K cycles [1] [2] UL, CUR (N.C.) VDE 3 A at 250 VAC general use, 100 K cycles [1] [2] 3 A at 30 VDC resistive, 100K cycles [1] [2] Form A N.O.: 5 A 250 VAC [1] [2] Form C N.O.: 5 A 250 VAC [1] [2] Form C N.C.: 3 A 250 VAC [1] [2] Silver cadmium oxide [1] or silver nickel [2]. Gold plating available. <100 milliohms initially Mechanical Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Material Resistance COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 253 mW (Standard Coil) 113 mW (Sensitive Coil) 1.1 W at 20C (68F) 40C (72F) standard coil 20C (36F) sensitive coil Max. 105C (221F) Max. Immersion Time Weight Packing unit in pcs NOTES 1. All values at 20C (68F). 2. Relay may pull in with less than "Must Operate" value. 3. Specifications subject to change without notice. ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2005-09-21 Junkersstrasse 3, D-82178 Puchheim, Germany AZ940 RELAY ORDERING DATA COIL SPECIFICATIONS - Standard Coil (SPDT and SPST) Nominal Coil VDC 3 5 6 9 12 18 24 Must Operate VDC 2.3 3.8 4.5 6.8 9.0 13.5 18.0 Max. Continuous VDC 4.7 7.7 9.4 14.0 18.7 28.1 37.5 Coil Resistance Ohm 10% 20 55 80 180 320 720 1,280 ORDER NUMBER* AZ940-1C-3D AZ940-1C-5D AZ940-1C-6D AZ940-1C-9D AZ940-1C-12D AZ940-1C-18D AZ940-1C-24D * Substitute "1A" for "1C" to indicate 1 Form A contacts. Add suffix "B" to "1A" or "1C" for silver nickel contacts. Add suffix "E" at the end of order number for sealed version. Add suffix "G" for gold plated contacts. COIL SPECIFICATIONS - Sensitive Coil (SPST) Nominal Coil VDC 3 5 6 9 12 18 24 Must Operate VDC 2.3 3.8 4.5 6.8 9.0 13.5 18.0 Max. Continuous VDC 7.0 11.7 14.0 20.9 28.1 41.9 55.5 Coil Resistance Ohm 10% 45 125 180 400 720 1,600 2,800 ORDER NUMBER** AZ940-1A-3DS AZ940-1A-5DS AZ940-1A-6DS AZ940-1A-9DS AZ940-1A-12DS AZ940-1A-18DS AZ940-1A-24DS ** Add suffix "B" to "1A" for silver nickel contacts. Add suffix "E" at the end of order number for sealed version. Add suffix "G" for gold plated contacts. MECHANICAL DATA PC BOARD LAYOUT .807 [20.50] .417 [10.59] .054 [1.36] .400 [10.16] .300 [7.62] .058 [1.49] .300 [7.62] .622 [15.80] .020 [0.51] 5 x o .051 [o 1.3] .100 [2.54] 5 x.157 [4.0] WIRING DIAGRAM 1 5 8 2 x.014.005 [0.350.12] 5 x.028.005 [0.760.12] 1 FORM A 5 8 3 x.012.005 [0.310.12] 16 FORM C 10 VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: .010" ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2005-09-21 Junkersstrasse 3, D-82178 Puchheim, Germany |
Price & Availability of AZ940-1A-18DS
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |